Polystyrene nanoplastics with different functional groups and charges have different impacts on type 2 diabetes.

BACKGROUND: Increasing attention is being paid to the environmental and health impacts of nanoplastics (NPs) pollution. Exposure to nanoplastics (NPs) with different charges and functional groups may have different adverse effects after ingestion by organisms, yet the potential ramifications on mammalian blood glucose levels, and the risk of diabetes remain unexplored. RESULTS: Mice were exposed to PS-NPs/COOH/NH2 at a dose of 5 mg/kg/day for nine weeks, either alone or in a T2DM model. The findings demonstrated that exposure to PS-NPs modified by different functional groups caused a notable rise in fasting blood glucose (FBG) levels, glucose intolerance, and insulin resistance in a mouse model of T2DM. Exposure to PS-NPs-NH2 alone can also lead the above effects to a certain degree. PS-NPs exposure could induce glycogen accumulation and hepatocellular edema, as well as injury to the pancreas. Comparing the effect of different functional groups or charges on T2DM, the PS-NPs-NH2 group exhibited the most significant FBG elevation, glycogen accumulation, and insulin resistance. The phosphorylation of AKT and FoxO1 was found to be inhibited by PS-NPs exposure. Treatment with SC79, the selective AKT activator was shown to effectively rescue this process and attenuate T2DM like lesions. CONCLUSIONS: Exposure to PS-NPs with different functional groups (charges) induced T2DM-like lesions. Amino-modified PS-NPs cause more serious T2DM-like lesions than pristine PS-NPs or carboxyl functionalized PS-NPs. The underlying mechanisms involved the inhibition of P-AKT/P-FoxO1. This study highlights the potential risk of NPs pollution on T2DM, and provides a new perspective for evaluating the impact of plastics aging.

Comparing the effects and mechanisms of exposure to polystyrene nanoplastics with different functional groups on the male reproductive system.

After aging in the environment, some nanoplastics will carry different charges and functional groups, thereby altering their toxicological effects. To evaluate the potential impact of aging of nanoplastics on the mammalian reproductive system, we exposed C57BL/6 male mice to a dose of 5 mg/kg/d polystyrene nanoparticles (PS-NPs) with different functional groups (unmodified, carboxyl functionalized and amino functionalized) for 45 days for this study. The results suggest that PS-NPs with different functional groups triggered oxidative stress, a decreased in the testis index, disruption of the outer wall of the seminiferous tubules, reduction in the number of spermatogonia cells and sperm counts, and an increased in sperm malformations. We performed GO and KEGG enrichment analysis on the differentially expressed proteins, and found they were mainly enriched in protein transport, RNA splicing and mTOR signaling. We confirmed that the PI3K-AKT-mTOR pathway is over activated, which may lead to reduction of spermatogonia stem cells by over differentiation. Strikingly, PS-NPs with functional group modifications are more toxic than those of unmodified polystyrene, and that PS-NPs with positively charged amino modifications are the most toxic. This study provides a new understanding for correctly evaluating the toxicological effects of plastic aging, and of the mechanism responsible for the reproductive toxicity caused by nanoplastics.

High transparency, water vapor barrier and antibacterial properties of chitosan/carboxymethyl glucan/poly(vinyl alcohol)/nanoparticles encapsulating citral composite film for fruit packaging.

Utilizing antibacterial packaging material is an effective approach to delay fruit rotting and spoilage thereby minimizing financial losses and reducing health harm. However, the barrier and mechanical properties of biodegradable antibacterial packaging materials are barely compatible with transparency. Herein, antimicrobial nanoparticles encapsulating citral (ANPs) were first prepared by emulsification under the stabilization of oxidized dextran (ODE) and ethylene diamine. Then, composite films with high transparency, good water vapor barrier, and mechanical and antibacterial properties for fruits packaging were prepared from chitosan (CS), carboxymethyl-glucan (CMG), poly(vinyl alcohol) (PVA), and ANPs by solvent casting strategy. The synergistic effects of electrostatic interaction and hydrogen bonding could regulate crystalline architecture, generating high transparency of the composite films (90 %). The mechanical properties of the composite film are improved with elongation at break up to 167 % and stress up to 32 MPa. The water vapor barrier property of the film is appropriate to the packed fruit for less weight loss and firmness remaining. Simultaneously, the addition of ANPs endowed the film with excellent antimicrobial and UV-barrier capabilities to reduce fruit mildew, thereby extending the shelf life of fruits. More importantly, the composite polymer solution could be sprayed or dipped directly on fruits as a coating for food storage to improve food shelf life, substantially expanding its ease of use and scope of use.

Polymer Donor with a Simple Skeleton and Minor Siloxane Decoration Enables 19% Efficiency of Organic Solar Cells.

Development of polymer donors with simple chemical structure and low cost is of great importance for commercial application of organic solar cells (OSCs). Here, side-chain random copolymer PMQ-Si605 with a simply 6,7-difluoro-3-methylquinoxaline-thiophene backbone and 5% siloxane decoration of side chain is synthesized in comparison with its alternating copolymer PTQ11. Relative to molecular weight (Mn) of 28.3 kg mol-1 for PTQ11, the random copolymer PMQ-Si605 with minor siloxane decoration is beneficial for achieving higher Mn up to 51.1 kg mol-1. In addition, PMQ-Si605 can show stronger aggregation ability and faster charge mobility as well as more efficient exciton dissociation in active layer as revealed by femtosecond transient absorption spectroscopy. With L8-BO-F as acceptor, its PMQ-Si605 based OSCs display power conversion efficiency (PCE) of 18.08%, much higher than 16.21% for PTQ11 based devices. With another acceptor BTP-H2 to optimize the photovoltaic performance of PMQ-Si605, further elevated PCEs of 18.50% and 19.15% can be achieved with the binary and ternary OSCs, respectively. Furthermore, PMQ-Si605 based active layers are suitable for processing in high humidity air, an important factor for massive production of OSCs. Therefore, the siloxane decoration on polymer donors is promising, affording PMQ-Si605 as a high-performing and low cost candidate.

Regulating Electrostatic Interactions toward Thermoresponsive Hydrogels with Low Critical Solution Temperature.

Low critical solution temperature (LCST) of commonly used thermoresponsive polymers in water is basically dominated by hydrophobic interactions. Herein, a novel thermoresponsive system based on electrostatic interactions is reported. By simply loading aluminum chloride (AlCl3 ) into non-responsive poly(2-hydroxyethyl acrylate) (PHEA) hydrogels, PHEA-Al gels turn to have reversible thermoresponsive behavior between transparent and opaque without any volume change. Further investigations by changing metal ion-polymer compositions unravel the necessity of specific electrostatic interactions, namely, cation-dipole bonding interactions between hydroxy groups and trivalent metal ions. The thermoresponsive hydrogel demonstrates high transparency (≈95%), excellent luminous modulation capability (>98%), and cyclic reliability, suggesting great potential as an energy-saving material. Although LCST control by salt addition is widely known, salt-induced expression of thermoresponsiveness has barely been discussed before. This design provides a new approach of easy fabrication, low cost, and scalability to develop stimuli-responsive materials.

Skin-Inspired Patterned Hydrogel with Strain-Stiffening Capability for Strain Sensors.

Flexible materials with ionic conductivity and stretchability are indispensable in emerging fields of flexible electronic devices as sensing and protecting layers. However, designing robust sensing materials with skin-like compliance remains challenging because of the contradiction between softness and strength. Herein, inspired by the modulus-contrast hierarchical structure of biological skin, we fabricated a biomimetic hydrogel with strain-stiffening capability by embedding the stiff array of poly(acrylic acid) (PAAc) in the soft polyacrylamide (PAAm) hydrogel. The stress distribution in both stiff and soft domains can be regulated by changing the arrangement of patterns, thus improving the mechanical properties of the patterned hydrogel. As expected, the resulting patterned hydrogel showed its nonlinear mechanical properties, which afforded a high strength of 1.20 MPa while maintaining a low initial Young's modulus of 31.0 kPa. Moreover, the array of PAAc enables the patterned hydrogel to possess protonic conductivity in the absence of additional ionic salts, thus endowing the patterned hydrogel with the ability to serve as a strain sensor for monitoring human motion.

Evaluation the in vivo behaviors of PM2.5 in rats using noninvasive PET imaging with mimic particles.

Inhaled PM2.5 particles is harmful to human health. However, real-time tracking of PM2.5 particles and dynamic evaluation of the pharmacokinetic behaviors in vivo are still challenging. Here, PET imaging is utilized to noninvasively monitor the in vivo behavior of PM2.5 particles in rats. To mimic aerosol PM2.5 particles suspended in ambient air, 89Zr-labeled melanin nanoparticles (89Zr-MNP) are nebulized into microscopic liquid particles with a mean size of 2.5 µm. Then, the 89Zr-labeled PM2.5 mimic particles (89Zr-PM2.5) are administrated into rats via inhalation. PET imaging showed that 89Zr-PM2.5 mainly accumulated in the lungs for up to 384 h after administration. Besides, we also observe that a small amount of 89Zr-PM2.5 can penetrate the brain through the inhalation. Further PET imaging showed that enhanced uptakes of 18F-FDG and 18F-DPA-714 were found in the brain of rats upon PM2.5 mimic particle exposure, which revealed that pulmonary exposure to PM2.5 could cause potential damages to the brain. Note that abnormal glucose metabolism was reversed, but the neuroinflammation was permanent and could not be alleviated after ceasing PM2.5 exposure. Our results demonstrate that PET is a sensitive and feasible tool for evaluating the in vivo behaviors of PM2.5.

Co-exposure to polystyrene microplastics and di-(2-ethylhexyl) phthalate aggravates allergic asthma through the TRPA1-p38 MAPK pathway.

Increasing attention has been paid to the potential impact of microplastics (MPs) pollution on human health. MPs and phthalates coexist in the environment, however, the effects of exposure to MPs alone or to a combination of di-(2-ethylhexyl) phthalate (DEHP) and MPs on allergic asthma are unclear. This study investigates the effects of exposure to polystyrene microplastics (PS-MPs) or co-exposure with DEHP, on allergic asthma, and the underlying molecular mechanisms. We established an allergic asthma model using ovalbumin, and mice were exposed to PS-MPs (5 mg/kg bw/day) alone, or combined with DEHP (0.5, 5 mg/kg bw/day), for 28 days. The results showed that in the presence of ovalbumin (OVA) sensitization, exposure to PS-MPs alone slightly affected airway inflammation, and airway hyperresponsiveness, while co-exposure to PS-MPs and DEHP caused more significant damage. Co-exposure also induced more oxidative stress and Th2 immune responses, and activation of the TRPA1 and p38 MAPK pathways. The aggravation of asthmatic symptoms induced by co-exposure to PS-MPs and DEHP were inhibited by blocking TRPA1 ion channel or p38 MAPK pathway. The results demonstrated that co-exposure to PS-MPs and DEHP exacerbates allergic asthma, by exacerbating oxidative stress and inflammatory responses, and activating the TRPA1-p38 MAPK pathway.

Targeting a xenobiotic transporter to ameliorate vincristine-induced sensory neuropathy.

Vincristine is a widely used chemotherapeutic drug for the treatment of multiple malignant diseases that causes a dose-limiting peripheral neurotoxicity. There is no clinically effective preventative treatment for vincristine-induced sensory peripheral neurotoxicity (VIPN), and mechanistic details of this side effect remain poorly understood. We hypothesized that VIPN is dependent on transporter-mediated vincristine accumulation in dorsal root ganglion neurons. Using a xenobiotic transporter screen, we identified OATP1B3 as a neuronal transporter regulating the uptake of vincristine. In addition, genetic or pharmacological inhibition of the murine orthologue transporter OATP1B2 protected mice from various hallmarks of VIPN - including mechanical allodynia, thermal hyperalgesia, and changes in digital maximal action potential amplitudes and neuronal morphology - without negatively affecting plasma levels or antitumor effects of vincristine. Finally, we identified α-tocopherol from an untargeted metabolomics analysis as a circulating endogenous biomarker of neuronal OATP1B2 function, and it could serve as a companion diagnostic to guide dose selection of OATP1B-type transport modulators given in combination with vincristine to prevent VIPN. Collectively, our findings shed light on the fundamental basis of VIPN and provide a rationale for the clinical development of transporter inhibitors to prevent this debilitating side effect.

Correction: One-step mild preparation of tough and thermo-reversible poly(vinyl alcohol) hydrogels induced by small molecules.

Correction for 'One-step mild preparation of tough and thermo-reversible poly(vinyl alcohol) hydrogels induced by small molecules' by Chuang Dong et al., Chem. Commun., 2021, 57, 3789-3792, https://doi.org/10.1039/D1CC00578B.

Preparation of high electromagnetic interference shielding and humidity responsivity composite film through modified Ti3C2Tx MXene cross-linking with sodium alginate.

This paper established a new kind of L-citrulline-modified MXene cross-linked sodium alginate composite film through solution blending and casting film methods. The L-citrulline-modified MXene cross-linked sodium alginate composite film exhibited high electromagnetic interference shielding efficiency of 70 dB and high tensile strength of 7.9 MPa, which were much higher than the sodium alginate film without L-citrulline-modified MXene. In addition, the L-citrulline-modified MXene cross-linked sodium alginate film appeared humidity responsibility in a water vapor environment, the weight, thickness, and current appeared to increase trend and the resistance appeared to decrease trend after it absorbed water, and these parameters recovered to their original values after drying.

High-Strength, Degradable and Recyclable Epoxy Resin Based on Imine Bonds for Its Carbon-Fiber-Reinforced Composites.

Carbon fiber (CF) is widely used in the preparation of carbon-fiber-reinforced polymer composites (CFRP) in which it is combined with epoxy resin due to its good mechanical properties. Thermosetting bisphenol A epoxy resin, as one of the most common polymer materials, is a non-renewable resource, leading to a heavy environmental burden and resource waste. To solve the above problems and achieve high mechanical and thermal properties comparable to those of bisphenol A, herein, a high-performance, degradable and recyclable bio-based epoxy resin was developed by reacting the lignin derivative vanillin with 4-amino cyclohexanol via Schiff base. This bio-based epoxy resin showed a Young's modulus of 2.68 GPa and tensile strength of 44 MPa, 36.8% and 15.8% higher than those of bisphenol A epoxy, respectively. Based on the reversible exchange reaction of the imine bond, the resin exhibited good degradation in an acidic environment and was recoverable by heat treatment. Moreover, the prepared epoxy resin could be used to prepare carbon fiber (CF)-reinforced composites. By washing off the epoxy resin, the carbon fiber could be completely recycled. The recovered carbon fiber was well preserved and could be used again for the preparation of composite materials to realize the complete recovery and utilization of carbon fiber. This study opens a way for the preparation of high-performance epoxy resin and the effective recycling of carbon fiber.

Rhodobacter sphaeroides as a model to study the ecotoxicity of 1-alkyl-3-methylimidazolium bromide.

The purple non-sulfur bacterium Rhodobacter sphaeroides was selected as a biological model to investigate its response to the toxicity of 1-alkyl-3-methylimidazolium bromide ([Cnmim]Br), a type of ionic liquid (IL), with different alkyl chain lengths (n describes the number of carbon atoms in the alkyl chain). The inhibition of bacterial growth by [Cnmim]Br was positively correlated with n. Morphological characterization revealed that [Cnmim]Br caused cell membrane perforation. The signal amplitude of the electrochromic absorption band shift of endogenous carotenoids showed a negatively linear correlation with n, and the amplitude of the blue-shift of the B850 band in light-harvesting complex 2 showed a positively linear correlation with n. Furthermore, an increase in blocked ATP synthesis and increase in antioxidant enzyme activity were observed in chromatophores treated with ILs containing longer alkyl chains. In summary, the purple bacterium can be developed as a model to monitor ecotoxicity and examine the mechanism of IL toxicity.

The effect and a mechanistic evaluation of polystyrene nanoplastics on a mouse model of type 2 diabetes.

Nanoplastics have become ubiquitous in the global environment and have attracted increasing attention. However, whether there is an influence between exposure to nanoplastics and diabetes is unclear. To determine the effects of exposure to Polystyrene nanoplastics (PS-NPs) and evaluate the underlying mechanisms, mice were orally exposed to PS-NPs at dosages of 1, 10, 30 mg/kg/day for 8 weeks, alone or combined with a high fat diet and streptozocin (STZ) injection. Our data showed that exposure to 30 mg/kg/day PS-NPs alone induced a significant increase in blood glucose, glucose intolerance and insulin resistance. Combined with a high fat diet and STZ injection, PS-NPs exposure markedly aggravated oxidative stress, glucose intolerance, insulin tolerance and insulin resistance, and induced lesions in the liver and pancreas. PS-NPs exposure could decrease the phosphorylation of AKT and GSK3ß, and treatment with SC79, a selective AKT activator, could increase the level of AKT and GSK3ß phosphorylation, effectively alleviating the increase in ROS levels in the liver or pancreas, and slightly attenuating the increase in fasting blood glucose levels and insulin resistance induced by PS-NPs exposure. This showed that exposure to PS-NPs aggravated type 2 diabetes and the underlying mechanism partly involved in the inhibition of AKT/GSK3ß phosphorylation.

Formaldehyde causes an increase in blood pressure by activating ACE/AT1R axis.

Previous studies suggest some link between formaldehyde exposure and harmful cardiovascular effects. But whether exposure to formaldehyde can cause blood pressure to rise, and if so, what the underlying mechanism is, remains unclear. In this study, C57BL/6 male mice were exposed to 0.1, 0.5, 2.5 mg/m3 of gaseous formaldehyde for 4 h daily over a three-week period. The systolic blood pressure (SBP), diastolic blood pressure (DBP), mean blood pressure (MBP) and heart rate (HR) of the mice were measured by tail-cuff plethysmography, and any histopathological changes in the target organs of hypertension were investigated. The results showed that exposure to formaldehyde did cause a significant increase in blood pressure and heart rate, and resulted in varying degrees of damage to the heart, aortic vessels and kidneys. To explore the underlying mechanism, a specific inhibitor of angiotensin converting enzyme (ACE) was used to block the ACE/AT1R axis. We observed the levels of ACE and angiotensin II type 1 receptor (AT1R), as well as the bradykinin (BK) in cardiac cytoplasm. The data suggest that exposure to formaldehyde induced an increase in the expression of ACE and AT1R, and decreased the levels of BK. Strikingly, treatment with 5 mg/kg/d ACE inhibitor can attenuate the increase in blood pressure and the pathological changes caused by formaldehyde exposure. This result has improved our understanding of whether, and how, formaldehyde exposure affects the development of hypertension.

Current advancements and future perspectives of long noncoding RNAs in lipid metabolism and signaling.

BACKGROUND: The investigation of lncRNAs has provided a novel perspective for elucidating mechanisms underlying diverse physiological and pathological processes. Compelling evidence has revealed an intrinsic link between lncRNAs and lipid metabolism, demonstrating that lncRNAs-induced disruption of lipid metabolism and signaling contribute to the development of multiple cancers and some other diseases, including obesity, fatty liver disease, and cardiovascular disease. AIMOF REVIEW: The current review summarizes the recent advances in basic research about lipid metabolism and lipid signaling-related lncRNAs. Meanwhile, the potential and challenges of targeting lncRNA for the therapy of cancers and other lipid metabolism-related diseases are also discussed. KEY SCIENTIFIC CONCEPT OF REVIEW: Compared with the substantial number of lncRNA loci, we still know little about the role of lncRNAs in metabolism. A more comprehensive understanding of the function and mechanism of lncRNAs may provide a new standpoint for the study of lipid metabolism and signaling. Developing lncRNA-based therapeutic approaches is an effective strategy for lipid metabolism-related diseases.

Research of Ferric Ion Regulation on a Polyimide/C-MXene Microcellular Composite Film.

This paper established a new kind of polyimide/C-MXene composite films with a microcellular structure for electromagnetic interference shielding through solution mixing and liquid phase separation methods. Polyimide was used as the resin material, Ti3C2Tx MXene was used as the electromagnetic wave-shielding medium, l-citrulline was used as the surface modification agent, ferric trichloride (especially the ferric ion) was used as the cross-linking agent between the polyimide and modified C-MXene, and a microcell was used as the shielding structure. By adjusting the content of ferric ions, the foam structure, mechanical properties, thermal conductivity, and electromagnetic interference shielding efficiency of the polyimide/C-MXene microcellular composite film could be controlled. The higher the ferric ion content, the smaller the foam size and the higher the electromagnetic interference shielding efficiency. With increasing ferric ion content, the tensile strength and Young's modulus appeared to first increase and then decrease; when the ferric ion content was 0.8 wt %, the tensile strength and Young's modulus reached their maximum values, which were 10.06 and 325.29 MPa, respectively. In addition, with increasing ferric ion content, the thermal insulation showed first decreasing and then increasing tendency; the lowest thermal conductivity was 0.17 W/(m·K) when the ferric ion content was 0.8 wt %.

High-Sensitivity Flexible Sensor Based on Biomimetic Strain-Stiffening Hydrogel.

Recently, flexible wearable and implantable electronic devices have attracted enormous interest in biomedical applications. However, current bioelectronic systems have not solved the problem of mechanical mismatch of tissue-electrode interfaces. Therefore, the biomimetic hydrogel with tissue-like mechanical properties is highly desirable for flexible electronic devices. Herein, we propose a strategy to fabricate a biomimetic hydrogel with strain-stiffening property via regional chain entanglements. The strain-stiffening property of the biomimetic hydrogel is realized by embedding highly swollen poly(acrylate sodium) microgels to act as the microregions of dense entanglement in the soft polyacrylamide matrix. In addition, poly(acrylate sodium) microgels can release Na+ ions, endowing hydrogel with electrical signals to serve as strain sensors for detecting different human movements. The resultant sensors own a low Young's modulus (22.61-112.45 kPa), high nominal tensile strength (0.99 MPa), and high sensitivity with a gauge factor up to 6.77 at strain of 300%. Based on its simple manufacture process, well mechanical matching suitability, and high sensitivity, the as-prepared sensor might have great potential for a wide range of large-scale applications such as wearable and implantable electronic devices.

Air Pollution Health Impact Monitoring and Health Risk Assessment Technology and Its Application - China, 2006-2019.

Air pollution is a significant risk factor contributing to the burden of disease in China. Health risk assessment and management are important to reduce the impact of air pollution on public health. To help formulate standardized health risk assessment techniques, a series of studies were conducted from 2006 to 2019. Through systematic review, study of molecular mechanisms, epidemiological investigation, and health effect monitoring, the overall project established a monitoring and evaluation indicator system, a comprehensive information platform, software for automatic data cleaning, and standardized health risk assessment techniques. Technical specifications have been issued by the National Health Commission for promoting health risk assessments across China. This paper introduces the project, the research approach, its main research accomplishments, innovations, and public health significance, and describes directions for further research.

Using 3.0 eV Large Bandgap Conjugated Polymer as Host Donor to Construct Ternary Semi-Transparent Polymer Solar Cells: Increased Average Visible Transmittance and Modified Color Temperature.

Although optical engineering strategy has been utilized to optimize average visible transmittance (AVT) of semi-transparent organic solar cells (ST-OSCs), judicious selection of active layer materials should be more direct and basic. Herein, an efficient ternary active layer is constructed with a wide bandgap (3.0 eV) fluorescent polymer FC-S1 as host donor, a middle bandgap polymer PM6 as guest donor, and a narrow bandgap non-fullerene Y6-BO as acceptor. Using FC-S1 as the host donor can allow more visible photons to penetrate the device. In the absence of optical engineering, the ternary ST-OSC with FC-S1:PM6:Y6-BO = 1:0.3:1.5 active layer of 30 nm thickness displays a much higher AVT of 49.28% than that of 32.34% for a PM6:Y6-BO = 1.3:1.5 based binary ST-OSC. The ternary ST-OSC provides a good power conversion efficiency of 6.01%, only slightly lower than 7.15% for the binary ST-OSC. The ternary ST-OSC also demonstrates a color rendering index (CRI) of 87 and a correlated color temperature (CCT) of 6916 K, all better than CRI of 80 and CCT of 9022 K for the binary ST-OSC. Moreover, the backbone of FC-S1 is mainly composed by fluorene and carbazole, two easily-accessible aromatic rings, which would meet low-cost concern of ST-OSCs.